Can be vulcanized to metal parts
Heater benefits
- Can be factory vulcanized to metal parts
- PSA assembly
- Low gas permeability
- Food service equipment
- Respirators
- Ultrasonic cleaners
- Photocopy machines
Silicone heater Technical data:
| Max. element temperature |
235 °C (457°F) |
| Min. element temperature |
-50°C, -58°F |
| Dielectric strength at 20°C as per ASTM KV/mm |
21-23 |
| Thermal Conductivity at 100°C W/(m•K) |
0,24 |
|
Moisture absorption as per ASTM D-570-63. (24h immersion at 23°C) |
0,1% |
| Waterproof as per IEC 335-1 sect. 15-16 |
Yes |
| Constant of dielectricity at 25°C, 50Hz |
2,9 - 3,6 |
| Bending radius, min |
3 mm |
| Max. element width |
610 mm |
| Power density |
1,3 W/cm? |
| Rated voltage |
Up to 1000V AC/DC single or 3 phase. |
| Approval/Standards |
As required,UL,CE,etc |